Softell CA7469A



Softell CA 7469 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’ s proprietary Catalloy process technology. It is used for the extrusion and calendering processes for applications such as TPO skins, W &C and technical compounds. It is also utilized as building block in TPE and TPV compounds. Softell CA 7469 A exhibits low stiffness, low gloss, low hardness and good impact resistance. The grade is available in natural pellet form.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.5 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 130 MPa
Tensile Stress at Break 7 MPa
Tensile Strain at Break 500 %
Charpy Impact Strength - Notched (23 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-20 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-40 °C) 80 kJ/m²
Shore Hardness (Shore A) 87
Vicat Softening Temperature (A50) 50 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 39 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet


Calendaring, Compounding




Automotive Parts, Impact Modification, Instrument Panels, Soft Profile & Sheets, TPO Foils and Skins, Wire & Cable

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications