Softell DKG 100N NATURAL

LyondellBasell

Description

Softell DKG 100N NATURAL is a 10% glass filled, thermoplastic polyolefin elastomer compound for injection molding. It is typically used for automotive interior applications that require low gloss, soft touch, high rigidity, good impact and scratch and mar resistance.

Availability

North America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 20 g/10 min
Density (23 °C) 0.96 kg/m³
Flexural Modulus (23 °C) 1750 MPa
Tensile Stress at Yield (23 °C) 28 MPa
Tensile Strain at Yield (23 °C) 10 %
Notched Izod Impact Strength (23 °C) 30 kJ/m²
Notched Izod Impact Strength (-30 °C) 10 kJ/m²
Deflection Temperature Under Load (0.45 MPa, Unannealed) 140 °C
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene Compounds


Applications

Interior Automotive Applications, Soft Touch Applications


Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications